What if even your minor painting mistake turns into a disaster and your whole efforts go completely in vain?
If you want your paint job to look professional and smooth, then you’ve to learn a hard way to avoid some common mistakes that may affect your work quality.
After all, you would like to flaunt your newly sprayed garage door, walls or car and wouldn’t want to hide your pride away from other people. Auto air gun or airbrush, whatever technique you choose for spray painting, you should refrain yourself from making these below mistakes.
1. Over Spraying
To achieve a perfect and even coat through while paint spraying, you should never spray too much paint on your wall. This can lead to paint running from the surface and droplets as the paint dries.
The perfect fix is that you adjust, sand it out and test your sprayer before applying the new layer of coat again. Start gradually with a thin and smooth layer and then you can build up the finish as needed.
2. Use Of High Pressure
If you are a first timer and you don’t know the technique of spray painting you can save your wall from being a mess by keeping the pressure of the gun low. You can start practicing with water initially, hold the spray gun and increase the pressure gradually.
Remember once you master the technique you can always adjust the spray gun’s pressure according to the viscosity of the paint. This will also elucidate the chances of too much fog or paint mist because of excess pressure.
3. Ignoring The Step Of Hose Priming
If you don’t want an effect on your surface where the paint completely splatters and ruins the beauty of your wall, then you need to prime the hose before painting it.
It’s easy to clean the surface of the hose, and you can easily remove dry paint or any sort of air bubbles through a blowgun. Remember if there is even a slight air bubble in your hose your wall will turn into a complete clutter.
4. Using Unclean Equipment
Even if you’re doing a normal painting with a brush or roller, you’ll get the smooth finish only when your equipment is clean. The same goes with painting where you use a spray gun. You must clean it before starting a new project. The paint can quickly dry out and can clog the hose, filter, nozzle and other associated parts if you skip this vital step of paint spraying. Regular cleaning is also essential to prevent the malfunction of your spray gun.
5. Opting For A Wrong Filter Size
If you’re looking for defense against debris flying along the wall, then the filter can be perfect arsenal. It easily sifts large particles and small debris that might be present inside the container of your paint. Choose the correct mesh size as per the recommendation of your dealer to prevent any sort of bump of paint that can ruin a perfectly applied and even coat.
6. Spraying In Uneven Pattern
Another spray paint mistake that you must avoid is the uneven spray paint pattern. Even if you’re a beginner, you can practice a bit to add perfection to your spray painting skill. Always move the paint gun left to right or in a straight direction to avoid creasing on your wall. You will get consistent results over time if you follow this spray paint technique.
By elucidating these common spray paint mistakes, you can ensure that every cranny is nicely coated, looks smooth and will remain to look the same in the foreseeable time.